West Ujimqin Banner, Xilingol League, Inner Mongolia, China sales9@alchemist-chem.com 1531585804@qq.com
Follow us:



Material Safety Data Sheet: Microcrystalline Wax

Identification

Product Name: Microcrystalline Wax
Chemical Family: Hydrocarbon Wax
CAS Number: 63231-60-7
Synonyms: Micro Wax, Microcrystallina
Product Use: Lubricants, cosmetic bases, polishes, adhesives, food packaging
Supplier Information: Contact details of manufacturer or distributor including address, telephone, emergency contact
Emergency Phone: 24-hour emergency response number

Hazard Identification

GHS Classification: Not classified as hazardous under GHS criteria
Health Hazards: Inhalation of fumes from heated material may cause irritation; ingestion and skin contact considered low risk
Environmental Hazards: Not expected to present a hazard to the environment under normal conditions
Physical Hazards: Heated wax can cause thermal burns
Signal Word: None
Hazard Statements: Melting wax releases hot fumes, risk from spilled molten material
Precautionary Statements: Avoid prolonged or repeated skin exposure to molten wax, use ventilation when heating
Pictogram: None required per regulatory guidelines

Composition / Information on Ingredients

Chemical Description: Hydrocarbon mixture derived from petroleum
Component: Microcrystalline Wax
CAS Number: 63231-60-7
Concentration: 100%
Impurities: No known hazardous impurities at standard concentrations
Other Names: Paraffin wax (microcrystalline grade)

First-Aid Measures

Inhalation: Move to fresh air, seek medical advice if respiratory irritation develops from heated fumes
Skin Contact: For contact with molten wax, cool with water, do not peel solidified wax from skin, cover burns, get medical help immediately
Eye Contact: Flush with water for at least 15 minutes, remove contact lenses, seek medical attention if irritation persists, for splashes from molten wax get urgent care
Ingestion: Rinse mouth, do not induce vomiting, get medical advice for large amounts
Symptoms and Effects: Mild irritation from fumes, thermal burns from hot wax
Notes for Doctor: Treat burns conventionally; ingestion has low systemic toxicity

Fire-Fighting Measures

Suitable Extinguishing Media: Dry chemical, carbon dioxide, foam, water fog
Unsuitable Media: Direct water stream may spread burning wax
Specific Hazards: Vapors may form explosive mixtures with air when heated above flash point
Combustion Products: Carbon dioxide, carbon monoxide, hydrocarbons
Protective Equipment: Self-contained breathing apparatus and full protective gear
Firefighting Instructions: Move containers from fire area if safe, cool surfaces with water spray, avoid inhaling combustion gases

Accidental Release Measures

Personal Precautions: Wear gloves, use eye protection, avoid direct contact with molten wax
Environmental Precautions: Prevent large quantities from reaching drains or waterways by diking with inert material
Cleanup Methods: Allow to solidify, scrape or shovel into proper waste container
Spill Area Ventilation: Ensure adequate ventilation, especially during cleanup of hot wax
Disposal: Transfer waste to approved disposal facilities following local and national regulations

Handling and Storage

Handling Practices: Work with adequate ventilation, minimize dust and fumes, use heat sources with care to avoid splashing of molten wax
Hygienic Measures: Wash hands after use, avoid eating or smoking during handling
Storage Conditions: Store in cool, dry, well-ventilated space away from open flames, hot surfaces, and oxidizing substances
Packaging Materials: Suitable for steel, polyethylene, or fiber drums
Incompatibilities: Strong oxidizing agents; avoid contact with halogens

Exposure Controls and Personal Protection

Exposure Limits: No established occupational exposure limit for microcrystalline wax dust or fumes
Engineering Controls: Install local exhaust ventilation if processing at high temperatures or in confined spaces
Respiratory Protection: Use air-purifying respirator if airborne concentrations exceed nuisance dust levels
Eye Protection: Safety glasses or face shield for handling molten material
Skin Protection: Heat-resistant gloves, long-sleeved clothing when pouring or stirring heated wax
General Hygiene: Remove contaminated clothing and wash skin with soap and water

Physical and Chemical Properties

Appearance: Solid, white to pale yellow
Odor: Very faint, characteristic hydrocarbon
pH: Not applicable
Melting Point: 60–90°C (140–194°F), varies by grade
Boiling Point: Above 300°C (572°F)
Flash Point: Above 240°C (464°F)
Solubility: Insoluble in water, soluble in hydrocarbons
Density: 0.89–0.93 g/cm³ at 25°C
Vapor Pressure: Negligible at ambient temperature
Viscosity: Higher than paraffin wax; thick, sticky consistency
Percent Volatile: Negligible under normal conditions

Stability and Reactivity

Chemical Stability: Stable under normal storage and handling conditions
Reactivity: No dangerous reaction expected under normal circumstances
Hazardous Decomposition: Decomposes at very high temperature to produce carbon oxides, hydrocarbons
Conditions to Avoid: Excessive heating, open flames, and sources of ignition
Incompatible Materials: Strong oxidizing agents such as peroxides, chlorine
Polymerization: Does not undergo hazardous polymerization

Toxicological Information

Likely Routes of Exposure: Inhalation of fumes, skin contact with molten wax
Acute Toxicity: Low oral and dermal toxicity expected, ingestion of small quantities not harmful
Chronic Effects: No evidence of long-term health issues from routine use; repeated skin contact with hot wax increases risk of burns
Sensitization: Not expected to cause skin or respiratory sensitization
Carcinogenicity: Not classified as carcinogenic according to IARC, NTP, OSHA
Other Health Effects: Workers exposed to hot wax vapors for extended periods may report mild headache or throat irritation

Ecological Information

Ecotoxicity: No evidence of significant toxicity to aquatic or terrestrial organisms at typical environmental concentrations
Persistence and Degradability: Biodegrades slowly in natural environments
Bioaccumulative Potential: Not expected to bioaccumulate
Mobility in Soil: Sinks in water, remains in soil matrix
Other Adverse Effects: Large spills form physical barrier in waterways but break down over time

Disposal Considerations

Disposal Methods: Recycle or recover product if feasible, dispose as non-hazardous solid waste in accordance with local/regional regulations
Waste Containers: Use sealed, labeled containers for transport and storage
Special Precautions: Do not allow large quantities to enter sewers or water bodies
Contaminated Packaging: Clean if possible, otherwise dispose as solid waste

Transport Information

UN Number: Not regulated
UN Proper Shipping Name: Microcrystalline Wax
Transport Hazard Classes: Not classified as dangerous for transport
Packing Group: Not applicable
Environmental Hazards: Not considered environmentally hazardous during transport
Special Precautions for Transport: Protect from extreme heat, keep containers upright

Regulatory Information

OSHA Status: Not classified as hazardous under OSHA Hazard Communication Standard
TSCA Inventory: Listed
DSL Status: Listed in Canada
REACH Registration: Registered under REACH in the European Union
Other Regulatory Status: Food grade types comply with FDA 21 CFR 172.886 for direct food contact
Labeling Requirements: None required for bulk warehousing or shipping under standard regulations
Restrictions: No specific restrictions in most jurisdictions, always consult local laws and safety guidelines