Contact Us
West Ujimqin Banner, Xilingol League, Inner Mongolia, China
© 2025 Alchemist Worldwide Ltd, All Right Reserved
Product Name: Arabic Gum
Synonyms: Acacia Gum, Gum Acacia, E414
Chemical Formula: Complex polysaccharide exuded from Acacia trees
Recommended Use: Food additive, emulsifier, pharmaceutical excipient, ink and adhesive ingredient
Manufacturer Information: Acacia Products Factory, 129 Industrial Zone, Saudi Arabia
Emergency Contact Number: +966-123-456-789
Recommended Restrictions: For industrial and professional use only; not recommended for inhalation as airborne dust
Classification: Not classified as hazardous according to GHS (Globally Harmonized System)
Label Elements: No signal word, no pictogram required
Health Hazards: May cause minor respiratory irritation if dust is inhaled; may cause mild eye or skin irritation upon repeated exposure
Environmental Hazards: Not considered environmentally hazardous; fully biodegradable
Physical Hazards: Organic dust may pose a risk of dust explosion in confined or poorly ventilated spaces
Precautionary Statements: Avoid generation of airborne dust; prevent contact with eyes and prolonged skin exposure; use proper ventilation and personal protective equipment in bulk handling
Substance: Naturally occurring complex mixture of polysaccharides and glycoproteins
Chemical Name: Arabic Gum
CAS Number: 9000-01-5
Concentration: Typically above 95% pure by dry weight
Impurities: Trace minerals, plant proteins, and moisture (variable, up to 10%); contains no dangerous additives
Inhalation: Move affected person to fresh air; seek medical attention if symptoms such as coughing or breathing difficulty persist
Skin Contact: Wash skin with soap and water; remove any contaminated clothing; medical attention usually unnecessary unless irritation continues
Eye Contact: Immediately flush eyes with water for at least 10 minutes; seek medical help if redness or discomfort continues
Ingestion: Rinse mouth with water; no significant health effects expected for small amounts; if discomfort or allergic reaction occurs, consult a doctor
Suitable Extinguishing Media: Water spray, foam, dry chemical powder, carbon dioxide
Unsuitable Media: High-pressure water jet may spread combustible dust
Special Hazards: Dust may form explosive mixtures with air; combustion produces carbon dioxide, carbon monoxide, and small amounts of oxides of nitrogen
Protective Equipment: Firefighters should wear self-contained breathing apparatus and protective clothing
Advice for Firefighters: Evacuate area if dust becomes airborne, avoid inhalation of combustion products
Personal Precautions: Use dust masks, eye protection, and gloves during cleanup
Environmental Precautions: Prevent large spills from entering drains or waterways; sweep up dry material
Containment Methods: Cover with damp cloth to minimize dust; vacuum or carefully sweep into labeled containers for reuse or disposal
Decontamination Procedures: Wash spill area with water after collection of bulk material; ventilate the area if dust has accumulated
Precautions for Safe Handling: Minimize dust generation; use local exhaust ventilation in processing or packaging facilities; avoid eating, drinking, or smoking during handling
Safe Storage Conditions: Store in cool, dry, and well-ventilated area away from direct sunlight, strong oxidizing agents, or open flames; keep containers tightly sealed
Incompatible Materials: Strong acids, alkalis, and oxidizing agents may degrade product and pose reactivity hazards
Other Recommendations: Store in food-grade or corrosion-resistant containers; periodic checks for moisture intrusion or mold are advised in humid environments
Control Parameters: No established exposure limits (OSHA, ACGIH, NIOSH)
Engineering Controls: Local exhaust ventilation and dust control systems recommended for bulk handling
Personal Protective Equipment: Dust mask or respirator in dusty environments; safety goggles for eye protection; gloves for sensitive skin or frequent contact
Hygiene Measures: Wash hands thoroughly after use; clean contaminated clothing before reuse; avoid touching face or eyes during handling
Appearance: Pale, yellow-brown powder or granules; can be spray-dried, ground, or lump form
Odor: Slight, characteristic vegetal scent
pH (1% Solution): Ranges from 4.5 to 5.5
Solubility: Fully soluble in cold water; insoluble in organic solvents
Boiling Point: Not applicable (decomposes before boiling)
Melting Point: Decomposes above 220°C
Bulk Density: 0.6 to 0.8 g/cm³
Flash Point: Not applicable as an aqueous solution; dust becomes flammable if suspended in air
Auto-Ignition Temperature: Not determined
Other Properties: Non-corrosive, non-volatile, stable under normal conditions
Chemical Stability: Stable at room temperature under dry, sealed conditions
Reactivity: Does not react with most common substances; degrades under strong acid or alkaline conditions
Hazardous Reactions: None under normal operating conditions
Conditions to Avoid: Prolonged exposure to heat, moisture, incompatible chemicals
Incompatible Materials: Oxidizing agents, concentrated mineral acids, strong alkalis
Decomposition Products: Oxides of carbon and nitrogen, small fragments of polysaccharides when burned
Acute Toxicity (Oral): Practically non-toxic; accepted as food-grade (LD50 > 10,000 mg/kg in rats)
Skin Corrosion/Irritation: May cause mild irritation in sensitive individuals
Eye Damage/Irritation: Can cause transient irritation if eye exposure occurs
Inhalation Effects: Excessive dust may irritate respiratory tract in sensitive people
Chronic Effects: No evidence of carcinogenicity, mutagenicity, reproductive toxicity, or persistent organ effects
Sensitization: Rare allergic responses have been reported in occupational settings
Aquatic Toxicity: Not toxic to aquatic organisms based on available studies
Persistence/Degradability: Rapidly biodegradable by soil and aquatic bacteria
Bioaccumulation: No known bioaccumulation potential
Mobility in Soil: High water solubility and soil permeability; breaks down swiftly under natural microbial action
Other Hazards: Large amounts may cause oxygen depletion if released untreated into waterways due to high organic load
Safe Disposal Methods: Collect and reuse or dispose of via landfill according to local regulations; incineration possible in approved facilities
Contaminated Packaging: Rinse with water before disposal or recycling; follow regional legal standards
Precautions: Avoid large release into natural watercourses; comply with municipal and environmental guidelines for organic waste
UN Number: Not classified as dangerous goods for transport
ADR/RID, IMDG, IATA Regulations: Not regulated
Proper Shipping Name: Not required
Packing Group: Not assigned
Special Transport Precautions: Prevent moisture ingress; guard against physical damage to packaging during transit
Food Additive Status: Recognized as safe (GRAS) by US FDA (21 CFR 184.1330); permitted food additive by JECFA, EU (E414)
Workplace Hazard Regulation: Not listed as hazardous by OSHA or WHMIS
Chemical Inventory Listings: Registered under EINECS (232-519-5), TSCA (USA), AICS (Australia)
Other International Standards: Meets Codex Alimentarius and ISO 9001:2015 standards for food safety and quality
Labeling Requirements: No specific hazard warnings required; recommended labeling according to good industrial practice
West Ujimqin Banner, Xilingol League, Inner Mongolia, China
